| Technical Data - HF at 1/4-inch | |
|---|---|
| Compressive Strength | 7,500 psi |
| Tensile Strength | 850 psi |
| Flexural Strength | 1,800 psi |
| Elastic Modulus | 1.7 x 105 psi |
| Density | 130lbs. / sq. ft. |
| Softening Point | 260°F |
| Cure Schedule - HF at 1/4 inch | |
|---|---|
| Usable Life of full unit / mix at 20°C | 15 minutes |
| Initial film gel time (joining up) at 20°C, 1/4 inch build | 20 minutes |
| Cure time to foot traffic at 20°C, 1/4 inch | 4-6 hours |
| Cure time to light wheeled traffic at 20°C, 1/4 inch | 12 hours |
| Cure time to heavy duty traffic at 20°, 1/4 inch | 24 hours |
| Full cure at 20°C, 1/4 inch | 3-5 days |
The Characteristics
Strength: Twice as strong as concrete (7500psi) our product withstands steel wheeled traffic, abrasion, and substantial impact; and is ready for foot traffic in 6 hours, forklift in 12 hours
Chemical Resistance: Resistant to virtually all chemicals, including acids, alkalis, and salts; and proven resistance to caustics for over 10 years (see data sheet at side bar).
Flexibility: Long chemical chains in our polymer allow it to adapt to thermal expansion/contraction without cracking.
Impervious to moisture: Certified by Golder Associates as impervious to liquids, (see data sheets at side bar).
Anti-bacterial: Impervious to moisture means our product will not result in a breeding ground for bacteria
Anit-slip: All floors are finished with a grit that makes them super-aggressive and slip resistant; available to be finished with grit and top coat for mopping, but still slip resistant.
Self-bonding: No additives or solvents are needed to act as a catalyst
Zero VOC’s: No odours emitted into the surrounding workspace, (see LEED data sheet at side bar).